Star-water-systems HSPJ100 (Flint & Walling) Manuel d'utilisateur télécharger pdf

Description

This pump is designed to sprinkle lawns and small

gardens from lakes, ponds, or rivers, empty or ﬁll

stock tanks, remove standing water from ﬂooded

areas, transfer water or boost water pressure.

Flammable liquids such as gasoline, chemicals or

corrosive liquids should never be used with this pump.

Safety Guidelines

This manual contains information that is very

important to know and understand. This information

is provided for SAFETY and to PREVENT EQUIPMENT

PROBLEMS. To help recognize this information,

observe the following symbols.

Danger indicates an imminently

hazardous situation which, if not avoided, will result

in death or serious injury.

Warning indicates a potentially

hazardous situation which, if not avoided, could result

in death or serious injury.

Caution indicates a potentially

hazardous situation, which, if not avoided, may result

in minor or moderate injury.

NOTE: Indicates important information, that if not

followed, may cause damage to equipment.

General Safety Information

1. Read these rules and instructions carefully. Failure

to follow these instructions could cause serious

bodily injury and/or property damage.

This pump is non-submersible.

This product contains chemicals

known to the State of California to cause cancer and

birth defects or other reproductive harm.

Pump only clear water.

Do not pump flammable or explosive fluids

such as gasoline, fuel oil, kerosene, etc. Do

not use in a flammable and/or explosive

atmosphere. Personal injury and/or property damage

could result.

NOTE: This pump is not designed to handle salt water,

brine, laundry discharge or any other application

which may contain caustic chemicals and/or foreign

materials. Pump damage could occur if used in these

applications and will void warranty.

All wiring must be

performed by a qualified electrician. The

pump must be installed in compliance with

all local and national codes.

2. Connect this product to a grounded circuit

equipped with a ground fault circuit interruptor

(GFCI) device.

3. Before installing this product, have the electrical

circuit checked by an electrician to ensure proper

grounding.

BE CERTAIN the pump power source

is disconnected before installing or

servicing pump.

5. Be sure the water source and piping are clear of

sand, dirt and scale. Debris will clog pump and

void warranty.

6. Failure to protect pump and piping from freezing

could cause severe damage and will void the

warranty.

7. Do not run pump dry.

Installation

PUMPING FROM LAKES, PONDS OR SMALL STREAMS

1. Locate pump as close as possible to the water

source, keeping the vertical distance from the

water to pump as small as possible. Place pump

on level support. Protect against ﬂooding and

excessive moisture.

2. Long lengths of pipe or hose and use of many

ﬁttings will reduce pump ﬂow. Use the smallest

number of ﬁttings and shortest possible length of

pipe or hose.

4. Connect inlet pipe or hose to pump. The inlet

connection is designed for 1” NPT thread. Rigid

pipe such as PVC will work ﬁne for inlet and outlet

pipe. (Reminder: Minimize length of pipe and

number of ﬁttings.) An adapter for garden hose is

included (see Figure 1).

PORTABLE LAWN

SPRINKLER AND UTILITY

PUMP

FW0667

0611

Supersedes

0707

IL0458

1 2 3 4

Résumé du contenu

Page 1 - SPRINKLER AND UTILITY

Page 2 - Maintenance

Page 3 - Troubleshooting Chart

Page 4 - ONE YEAR LIMITED WARRANTY

Commentaires sur ces manuels

Pas de commentaire

Star-water-systems HSPJ100 (Flint & Walling) Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pompes Star-water-systems HSPJ100 (Flint & Walling). Star Water Systems HSPJ100 (Flint & Walling) User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pompes Star-water-systems HSPJ100 (Flint & Walling)